慧聪网首页 | 添加到收藏夹
  • ·如何搜索？
  • 全部供应 最新供应 行情
    • 首页 > 供应首页 > 汽车维修保养 > 汽车维修工具   （共找到 352 条 供应信息）
    设置筛选条件
    按分类筛选：
    按行业筛选：
    按品牌筛选：
    缩小搜索范围
    浏览方式： 列表   橱窗  
    批量询盘
    供应信息/公司
    发发在线
    买卖通指数
    价格(元)
     
    供应奔驰变速箱拆装器 [2008-11-17 09:12]
    [摘要]能够快捷方便拆卸奔驰汽车变速箱,方便修理,价格公道 奔驰变速箱拆装器 发布单位:青岛风驰普利特工具设备有限公司 公司地址:青岛市四方区洛阳路1号(汽车配件城一...
    慧聪网买卖通会员
    40
    面议
     
    [摘要]ITEMSPECAPPLICABLE111465MM/14PTOYOTA, NISSION102167MM/14PFORD, MITSUBISHI, MAZDA123574MM/14PBENZ, BMW, AUDI, VW, OPELUSE WITH 1/2"DR.TOOL OR 21MM...
    面议
     
    [摘要]此工具可支擋正時皮帶盤轉動拆裝中心螺絲,因皮帶盤有防震設計, 需使用專用拔卸器將皮帶盤拔出,才不會破壞皮帶盤功能.• 適用車種:BMW (M52,M...
    面议
     
    [摘要]• SPECIFICATION: 79MM / 15P• APPLICATION: MITSUBISHI, HONDA, NISSAN, TOYOTA• USE WITH 1/2" DR OR 21MM WRENCH• 100PCS / 19KGS...
    面议
     
    [摘要]CAN REMOVE EVEN THE MOST STUBBORN PINS FROM THE CYLINDER HEAD, UNLIKE THE SHORT SLIDE HAMMER PREVIOUSLY USED TO ATTEMPT THIS JOB. &#8226...
    面议
     
    [摘要]FOR REMOVING AND INSTALLING THE JOINT USING A HYDRAULIC PRESS.• APPLICABLE:E30, E36 拆装器;三角架铁套拆装器 发布单位:西安航远科技有限责任公司...
    面议
     
    [摘要]PULLS FLANGE-TYPE REAR AXLES ON MOST LATE MODEL PASSENGER CARS & LIGHT TRUCKS.• DESIGNED TO FIT AXLES WITH BOLTS & STUDS UP TO 9/16"...
    面议
     
    [摘要]FOR SPLITTING TRACK-ROD ENDS, ANTI-ROLL BAR MOUNTINGS, BALL JOINTS, ETC.• JAW OPEN: 22MM 拔卸器;球头拔卸器 发布单位:西安航远科技有限责任公司...
    面议
     
    [摘要]DURABLE META T HANDLE DESIGN.• CHROME-MOLYBDENUM STEEL TIP.• TIP LENGTH:73MM• CHANGEABLE TIP DESIGN. 补胎针;补胎条用补胎针 发布单位...
    面议
     
    [摘要]USE THE EXTENSION AND ADJUSTABLE WIRE TO CLIP THE AXLE TIGHTLY.• PULL OUT WITH THE SLIDE HAMMER EASILY 传动轴滑鎚組;传动轴 发布单位:西安航远...
    面议
     
    [摘要]SPECIAL STEEL FOR REMOVING THE BALL PIVOTS ON STEERING.•JAW OPEN: 17MM 拔卸器;球头拔卸器 发布单位:西安航远科技有限责任公司 公司地址:陕西省西安...
    面议
     
    [摘要]A GREAT TOOL USED TO REPLACE FRONT WHEEL BEARING WITHOUT REMOVING THE STEERING KNUCKLE & STRUT ASSEMBLY.• AS THE SPINDLE...
    面议
     
    [摘要]• SPECIALL DESIGN FOR REMOVE AND INSTALL THE OIL FILTER.• USE WITH 1/2" DRIVE.• CAPACITY:RANGE 86-120MM 扳手;机油芯扳手 发布单位:...
    面议
     
    [摘要]SIMPLY SECURE SHAFT THROUGH OPENING IN ADAPTER TO REMOVE THE HALF SHAFT FROM CVJOINTS ON MOST FORWARD VEHICLES 滑锤组;传动轴...
    面议
     
    [摘要]415 HARDENED 42˚~45˚• CAPACITY 1 1/4"-2 1/2" (30MM X 50MM) • BOLT (φ9.5MM X L125MM X 3/8" X 24UNF)•...
    面议
     
    [摘要]STEEL CONSTRUCTED TOOL DEEP THREADED HEAD FOR POSITIVE SEALING OF ALL SNAP-IN TYPE PASSENGER CAR TIRE VALVE STEMS. • RUBBER COVER...
    面议
     
    供应气门芯起子 JTC-3932 [2008-04-11 08:43]
    [摘要]FOR INSTALLATION AND REMOVAL OF STANDARD VALVE CORES.• HAS A SCREWDRIVER-STYLE HANDLE. • TIP DIAMETER: 5.5MM• TIP LENGTH: 60MM 起子...
    面议
     
    [摘要]READILY ADJUSTABLE SLIDING LEGS TO PULL WHEEL HUBS MORE QUICKER & EASIER WHERE THE BOLT CIRCLE DOES NOT EXCEED 7-1/2"(190.2MM), ALSO...
    面议
     
    [摘要]USE FOR REMOVING AND INSTALLING THE TOP SHOCK RETAINING NUT.• APPLICATIONS:BENZ W220 套筒;避震器座套筒 发布单位:西安航远科技有限责任公司 公司...
    面议
     
    供应风扇扳手 JTC-1702 [2008-04-11 08:43]
    [摘要]REMOVES LOCK NUTS ON THERMO-VISCOUS FANS FOUND ON FORD, MERCEDES…MANY VEHICLES. • MADE FROM TEMPERED PRESSED STEEL 扳手;风扇扳手 发布...
    面议
     
    [摘要]FULL LENGTH:930MM, THE TOP OF THE OIL GAUGE CAN TURN BACK TO 90 DEGREES.• APPLICABLE:ENGINE MODEL:112, 113, 646, 647, 648 机油油尺;油尺 发布...
    面议
     
    [摘要]PROFESSIONAL OIL FILTER WRENCH UNIQUE "SWIVEL-HANDLE" DESIGN ALLOWS ADJUSTABLE BAND TO ROTATE 180 DEGREES, TO REACH TIGHT AREAS.FULL...
    面议
     
    [摘要]DESIGNED TO REMOVE AND INSTALL BMW THMR1 TRANSMISSION 拆装组;变速箱拆装组 发布单位:西安航远科技有限责任公司 公司地址:陕西省西安市高新区科技二路72号...
    面议
     
    [摘要]DURABLE METAL T HANDLE DESIGN. • CHROME-MOLYBDENUM STEEL TIP.• TIP LENGTH: 72MM• CHANGEABLE TIP DESIGN 补胎针;补胎条用补胎针 发布...
    面议
     
    批量询盘
    或
    对比供应
    全选
    清空

    快速发布求购信息：

    • 找供应
    • 找求购
    • 找产品
    • 找公司
    • 招聘
    • 资讯
    • 技术
    • 论坛
    • 博客



    排名 关键字 搜索量
     更多>>

    使用RSS阅读器订阅供应信息